AMAZONE - USA

Electronics | Terminals | Software

Accurate placement of the seed

To avoid the over and under sowing at critical areas that often occurs in practice, precise sowing is very important. The remedy for the accurate placement is offered by the half-side control which reduces the relevant working width to half so that, especially in short-work and on the headland, a significant saving is achieved. The two halves of the drill each correspond to one controllable part-width section.

More information + Less information -
Saatleitungsueberwachung_rdax_170x124.jpg

Seed tube monitoring

An additional useful assistance system is the optional seed tube monitoring which immediately detects blockages at the coulter and in the seed pipe. Directly behind the distributor head, sensors check the seed flow inside the seed tubes. The system automatically detects when the drill is tramlining. Especially during long working days, the monitoring is an elegant possibility to check the performance.

More information + Less information -
More_than_ISOBUS_eine_Sprache_3_2

ISOBUS – Machine operation in the digital age

One language, many benefits! AMAZONE offers state-of-the-art technology with virtually unlimited possibilities with every ISOBUS-compatible machine. It does not matter whether you use an operator terminal by AMAZONE or an ISOBUS terminal directly installed in your tractor. ISOBUS indicates a global standard for communication between the operator terminal, tractors and connected implements, on the one hand, and agricultural office software on the other.

More information + Less information -
More_than_ISOBUS_Uebersicht

AMAZONE – more than just ISOBUS: Improved control, more yield! Precision Farming 4.0

Our competence in electronics: To increase the operational convenience, AMAZONE implements and operator terminals feature a level of functionality far beyond the ISOBUS standards.


The benefits of more than just ISOBUS:

  • Highest compatibility and safety function of your ISOBUS equipment
  • No additional modules on the machine. All ISOBUS machinery by AMAZONE is equipped as standard with the necessary ISOBUS functions.
  • MiniView display with all AMAZONE terminals and additional ISOBUS terminals. See, for instance, the machine data in the GPS view.
  • The possibility of using the tractor terminal solution or a twin terminal solution to separate the functionalities of tractor and the mounted implement.
  • Unique operation concept. Freely-configurable displays and individual user interfaces in the operator terminal
  • Up to 3 user profiles are possible. Establish for every driver or application an individual user profile!
  • Freely-configurable machine operation sequences, such as, the folding procedure of the booms of your AMAZONE crop protection sprayer
  • Intelligent tractor-ECU function evaluation
    Automatic motion sequence detection such as the automatic locking of a steering axle when reversing.
  • Integrated TaskController data logger. As a matter of principle, every ISOBUS telemetry solution is made possible (for example, TONI telemetry by CLAAS).
  • Freely-configurable part-width sections
More information + Less information -

Everything in view with the 2 terminal solution

In addition to the possibility of operating the AMAZONE ISOBUS machinery via the tractor terminal, there is the practical alternative of separating the functions of the tractor and the mounted implement and operating them via two terminals. The tractor terminal can continue to control the tractor or display the GPS applications, while the other operator terminal in the UT view is dedicated to the control and operation of the machinery.

More information + Less information -
AmaTron_4_Poster-Composing_d0_20180515 (1)

From simple to high-tech – everything is possible

With the ISOBUS-compatible AmaTron 4 and the AmaPad 2, AMAZONE offers two extremely convenient operator terminals for your ISOBUS machinery. In addition to just machine operation, there are other possible applications, such as GPS-Switch (automatic part-width section control).

  • All applications are pre-installed and can be tried out initially free of charge
  • Intuitive and clear operation
More information + Less information -

AmaPad 2 – An extremely convenient way of controlling agricultural machinery

A new dimension in control and monitoring: With AmaPad 2, AMAZONE offers an especially high performance operator terminal. The 12.1" multi-touch colour display is particularly convenient and fulfils the highest demands on Precision Farming. The operation of AmaPad is carried out entirely by touch. With the practical "MiniView concept”, applications which aren’t being actively operated at that moment but need to be monitored are clearly displayed at the side. When needed these can be enlarged using "a finger swipe”. The possibility of individualising the "dashboard” with the displays of choice rounds off the user ergonomics. In addition to the part-width section control, GPS-Switch pro, the GPS-Track pro parallel steering aid with integrated light bar is also unlocked as standard.


Benefits of AmaPad:

  • Large 12.1" multi-touch colour display
  • Expanded MiniView concept
  • Upgrade to automatic steering is possible thanks to the automatic GPS-Track Auto track guidance
  • Day-night mode


Equipped as standard with:

  • GPS-Maps pro
  • GPS-Track pro
  • GPS-Switch pro
More information + Less information -
Amatron3_rdax_170x113.jpg

AmaTron 3: One knows what one has!

AmaTron 3 features 8 backlit function keys and a high-contrast and low-reflection display. Depending on the driving situation and personal taste you can choose between the UT display (Universal Terminal) for machine operation or GPS displays. Here, the very good price-performance ratio is convincing! So AmaTron 3 is the ideal terminal for all who intend to supplement their existing AMAZONE machine park with a new ISOBUS machine. Benefits of AmaTron 3: • Compact design, requires little space • Low-priced entry-level model for the ISOBUS world • AmaTron 3 is a full ISOBUS terminal and allows, in addition, to operate all AMAZONE machines with AMABUS (AmaTron+ machines) • Several applications can be actuated at the same time. Via the “Toggle-Button” the operator can toggle easily between the operational screens. Terminal features: • ISOBUS compatible with all ISOBUS machinery from AMAZONE and other manufacturers • AMABUS implement operation • Tractor-ECU function to retrofit a non ISOBUS tractor (speed, PTO speed, ...) • USB interface for data exchange • ASD interface, e.g. for an N-sensor • GPS interface The following applications are possible: • Task Controller – job management in ISO-XML format • GPS-Maps (optional) – processing of application maps in shape file format • GPS-Track (optional) – parallel steering aid with optional external light bar • GPS-Switch (optional) – automatic part-width section control for up to 80 part width sections

More information + Less information -

AmaTron 4 – Manager for all

Simple and convenient operation, as intuitive as your tablet: Why not handle a terminal as intuitively as a tablet or a smartphone? With this in mind, AMAZONE developed the highly intuitive and operator-friendly AmaTron 4 which offers a noticeably smoother operation, especially when it comes to job management. AmaTron 4, with its 8" multi-touch colour display, meets the highest demands and offers you maximum user-friendliness. Via a finger swipe or the App carousel, one quickly navigates from application to application and to the clearly and simply structured operator terminal. The practical MiniView, a freely configurable status bar and an integrated light bar make the AmaTron 4 exceptionally easy and convenient to use.


Benefits of the AmaTron 4:

  • Automatic full screen mode when not being touched
  • Practical MiniView concept
  • Operation via touch screen or via soft keys
  • Especially intuitive and user-friendly
  • Field-related documentation
  • Practical-oriented and intelligent menu navigation
  • Day-night mode


Equipped as standard with: 

  • GPS-Maps&Doc
More information + Less information -
Cayena_22016-10-20.jpg

AMADRILL+ -Precise seed rates and intuitive operation

AMADRILL+ is the operator-friendly terminal for AMAZONE seed drills. Its clear design, with unmistakable symbols and bold figures on the display, offers great convenience. Especially on farms with temporary drivers and short seasons, it is an advantage to equip what would be otherwise a complex seed drill with such a simple, intuitive operating terminal. AMADRILL+ controls the fully electric metering of the machine. A simple key pressure is sufficient for calibration. After the calibration rate has been entered, the system adjusts itself independently. The specific benefits are shown at the field's edge: The function "pre-metering" offers convenience when sowing the field edges. Via the press of a button, the electric metering can be switched off, so that, for instance, preliminary work at the headland without sowing, is quickly and simply possible. Needless to say the usual functions of a modern seed drill controller are included: Simple setting and control of the tramline rhythm, in-cab seed rate control, monitoring of the blower fan and of the seed shaft and the integration of the fill level sensor in the seed hopper.

More information + Less information -
AmaPilot_d2_150130

All from a single source!

Thanks to the AUX-N feature, you can operate multiple functions of the machine via AmaPilot+ or any other ISOBUS multi-function joystick.


The benefits of AmaPilot+:

  • Perfect ergonomics
  • Almost every function to hand via the 3 levels
  • Adjustable palm support
  • Freely-programmable and individual button allocation
More information + Less information -

GPS-Switch

With GPS-Switch automatic part-width section control, AMAZONE can offer GPS-based, fully automatic part-width section control for all AMAZONE operator terminals and ISOBUS-compatible fertiliser spreaders, crop protection sprayers and seed drills.


GPS-Switch basic

  • Automatic part-width section control of up to 16 part-width sections
  • Optional for AmaTron 4


GPS-Switch pro

  • Automatic part-width section control of up to 128 part-width sections
  • Creation of virtual headlands
  • Creation of points of interests (POI)
  • Automatic boom lowering with AMAZONE crop protection sprayers
  • Supplied as standard for AmaPad 2
  • Optional for AmaTron 4
More information + Less information -
Automatische Teilbreitenschaltung (1) Teilbreitenschaltung

Automatic GPS-Switch part-area shut-off via Section Control

If the terminal is equipped with Section Control functionality, i.e. GPS-Switch part-width section control by AMAZONE, the part-width sections can be switched completely automatically depending on the GPS position. Once a field has been created, the driver can concentrate fully on operating the vehicle in automatic mode, since the part-width sections are switched automatically in wedge shaped fields and on headlands.


Advantages of the automatic part-width section control:

  • Less strain on the driver
  • Increased precision, even at night or at higher speeds
  • Fewer overlaps and misses
  • Saving of resources
  • Less crop damage and reduced environmental impact

1. Overlap zones
2. 8 part-width sections
3. ZA-V Tronic and ZA-V Profis Hydro in manual mode
4. 16 part-width sections
5. ZA-V Profis Hydro in automatic mode

More information + Less information -

GPS-Maps – part-area, site specific application

Part-area, site-specific application without any complications is possible with GPS-Maps. This is because this software module enables easy processing of application maps in Shape file format. In this respect, either the required application rate of the material to be applied can be processed or it is also possible to work from just the required quantity of the active ingredient directly.

  • Intuitive system for processing application maps
  • Automatic part-area, site-specific regulation of the application rate
  • Optimum crop management through needs-based application
  • Standard on AmaTron 4 and AmaPad 2
More information + Less information -
Cirrus_Autopoint_d0_IMG_5678_d1_150828_p50_rdax_170x110.jpg

GPS-Switch with AutoPoint

The new AutoPoint system automatically determines the delay time, thus the time between the start and the end of the metering process and takes into account the conveying behaviour of the seed at the coulter. Via a sensor on the coulter, seed flow is constantly checked during every switch on and off. This allows an immediate response to any changes in the conveying behaviour of the seed or to changes in the driving behaviour. This automatic switching is rounded off by the driver assist system in the operator terminal which indicates to the operator the optimum forward speed when driving into and out of the headland.

More information + Less information -
Screens_GPS-Track

GPS-Track – your parallel driving aid in the field

The GPS-Track parallel driving aid greatly eases orientation in the field, especially on grassland or areas without tramlines. It features various track modes such as the A-B line and contour travel. The deviation from the ideal line is shown graphically on the display by means of an integrated light bar. You always remain on track thanks to the clear steering guidance with precise tramline distances!

  • With a virtual light bar in the status bar
  • Supplied as standard for AmaPad 2
  • Optional for AmaTron 4
More information + Less information -
Lightbar_001_d2_130102_125pro_rdax_170x64.jpg

External light bar

As a possible extension for the GPS-Track parallel steering aid, an external light bar is available for AmaTron 3 which can be readily coupled with GPS-Track. The external light bar can be freely positioned in the tractor cab.

More information + Less information -
Cataya3000special_tpack_valtra_d0_kw_DJI_0201_Saat_teilflaechenspezifisch_d1_181228_p50_rdax_170x144.jpg

Simple and comfortable!

Especially in operation, no matter whether via an operator terminal from AMAZONE or with your tractor terminal, one can experience how practically-oriented the machine software has been developed. In this way, for instance, a simple and clear division of the field menu and the setting menu provides a very easy and intuitive operation. Understandable operational symbols ensure clearness and a safe functionality.

More information + Less information -

Job management and documentation

All standard ISOBUS terminals from AMAZONE can collect and save machine and site-specific data using Task Controller. The collected data can subsequently be used in your Farm Management Information System.

  • Create or load jobs with ease
  • Process jobs
  • Document and export the work done
  • Processing of application maps in an ISO-XML format
More information + Less information -

WindControl - Calm conditions at the touch of a button

The effect of the wind on the spread pattern can be permanently monitored and automatically compensated for by WindControl. A high-frequency wind sensor mounted on the machine records both the wind speed and the wind direction and transmits this information to the job computer.

Image film AMAZONE 1883


We need your consent

This content is provided by an external server. By activating the content, personal data may be accessed and Cookies may be utilised.