ZG-TS trailed spreader

Advantages of the ZG-TS:

•  Maximum precision during normal and border spreading, regardless of external conditions such as wind, hilly terrain or varying fertilizer properties  
• Optimum weight distribution that reduces axle loads  
• True track-following thanks to a steering axle with a steering angle of up to 28°
•  Highly efficient fertilization with maximum area coverage 

Enormous work rates   
With hopper capacities of 265 cu ft and 353 cu ft (7,500 l and 10,000 l), the ZG-TS models are especially efficient and ideal for large farms that focus particularly on increased precision. Their size saves valuable traveling and loading time. A large hopper opening enables convenient loading via a front end loader or from a bulk filling system.  
The belt floor, automatically centered to the middle, ensures optimum material flow.

Advantages of the base hopper

• Low hopper center of gravity  
• Low filling height
• Large fill opening
• Wear-resistant rubber floor belt  
• Automatic belt floor centering

1. Accurate metering
   After the pre-chamber, the fertilizer is metered by means of shutter slides exactly the same way as on the mounted spreaders.
2. Automatic pre-chamber filling
   An endless floor belt for conveying the fertilizer is provided along the bottom of the hopper. This automatically fills the pre-chamber during the spreading operation.

High-quality, multi-layer paint finish

The paintwork on a fertiliser spreader is exposed to particular demands. The paintwork is intended to protect the spreader from corrosion, especially when handling fertiliser and where moisture is involved. Starting with the 2022 model year, there is a new painting process for the ZA-V, ZA-TS and ZG-TS fertiliser spreader ranges. This involves, on the one hand, a cathodic dip painting process (known as KTL) for priming to give the best possible protection on the internal surfaces of tubes and box sections and, on the other hand, a powder coating process to create a high-quality visual finish with extra-thick paint providing increased protection against mechanical demands.

7 year manufacturer’s guarantee

Based on this optimum painting process, AMAZONE is able to offer its customers a manufacturer guarantee of seven years against rusting through, starting with the 2022 model year. From 01/01/2023, customers can apply to have the guarantee activated for ZA-V, ZA-TS, and ZG-TS models, starting from the 2022 model year. This registration is done very simply via the

manufacturer’s portal, myAmazone, bearing in mind the terms and conditions (www.amazone.net/7-years) stated there. After registration, one can continue to work without any worries.

The benefits

• Cathodic dip painting process 
  • Suppression of rust infiltration 
  • Best possible protection, even on the inner surfaces of tubes and box sections 
• Powder coated top coat 
  • Double protection through additionally applied powder coating 
  • Improved resistance against everyday wear and tear 
• Quality and reliability 
  • All the components on the spreading system and all hydraulic fittings are made from stainless steel 
  • Impact, UV and chemical resistant plastic sieves

High-quality multi-layer paint finish – the most modern from all angles:

1. 14-step paint preparation (e.g. degreasing) 
2. Zinc phosphating provides the most effective counteraction of rust formation 
3. Thick cathodic dip priming for full corrosion protection, even in cavities and those hard-to-reach areas 
4. Powder coating for a high-quality appearance and extra thick paint for increased protection against mechanical demands

The extremely clever Profis weighing system goes into action with its intelligent fill level management right from the loading stage. Without the use of an external scale, the system gives precise information about the load condition at all times, thus preventing overloading and empty travelling. Profis also sets standards as a filling aid as well as through the continuous measurement of the hopper contents.

The benefits

• Intelligent filling aid 
• Reliable fill level measurements even without using an external weighing system 
• Avoidance of unnecessary empty travelling and excessive residues